<?xml version="1.0" encoding="utf-8"?><feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en"><generator uri="https://jekyllrb.com/" version="3.10.0">Jekyll</generator><link href="https://dopamine-chamber.github.io/feed.xml" rel="self" type="application/atom+xml" /><link href="https://dopamine-chamber.github.io/" rel="alternate" type="text/html" hreflang="en" /><updated>2026-11-11T18:17:01+00:00</updated><id>https://dopamine-chamber.github.io/feed.xml</id><title type="html">the handstand dilemma</title><subtitle>Observe like a physicist. Unpack like an engineer. Experience like a practitioner.</subtitle><author><name>Dopamine Chamber. All rights are reserved</name></author><entry><title type="html">Why a handstand is unstable: an energy perspective</title><link href="https://dopamine-chamber.github.io/2026/10/20/an-energy-perspective.html" rel="alternate" type="text/html" title="Why a handstand is unstable: an energy perspective" /><published>2026-10-20T10:00:00+00:00</published><updated>2026-11-01T00:00:00+00:00</updated><id>https://dopamine-chamber.github.io/2026/10/20/an-energy-perspective</id><content type="html" xml:base="https://dopamine-chamber.github.io/2026/10/20/an-energy-perspective.html"><![CDATA[<p>The intrinsic instability of the system can also be explained through the concept of energy. When we are in a handstand, we are intuitively in a state of unstable equilibrium: we are almost motionless, but because of the unfavorable configuration we occupy within the gravitational field, our potential energy is at its maximum.</p>

<hr />

<details>
  <summary><strong>Toolbox</strong></summary>

  <ul>
    <li>
      <p><strong>Dot notation</strong>: θ̇ and θ̈ are the first and second time derivatives of the tilt angle. (θ̇ = ω) is the angular velocity [rad/s]; (θ̈ = α) is the angular acceleration [rad/s²].</p>
    </li>
    <li>
      <p><strong>Small-angle approximation</strong>: for θ ≪ 1 rad, (sin θ ≈ θ) and (cos θ ≈ 1 − θ²/2). It turns the nonlinear equations into linear ones.</p>
    </li>
    <li>
      <p><strong>Mechanical power</strong>: the rate at which a force or torque transfers energy. For a torque about a fixed axis, (P = τω) [W].</p>
    </li>
    <li>
      <p><strong>Rotational kinetic energy</strong>: the energy of rotation, (Eₖ = ½I₀ω²).</p>
    </li>
    <li>
      <p><strong>Conservative force</strong>: a force whose work depends only on the start and end positions, so it can be described by a potential energy. Gravity is one.</p>
    </li>
    <li>
      <p><strong>Gravitational potential energy and reference level</strong>: the energy stored by position. For the pendulum it is mg times the height of the CoM above the wrists, h cos θ. Only changes matter, so the zero can be chosen freely; here it is the upright position.</p>
    </li>
    <li>
      <p><strong>Mechanical energy and work–energy theorem</strong>: (E = Eₖ + Eₚ). Its rate of change equals the power of the non-conservative torques: (dE/dt = τω).</p>
    </li>
    <li>
      <p><strong>Chain rule</strong>: if y depends on x and x on t, then (dy/dt = (dy/dx)(dx/dt)).</p>
    </li>
    <li>
      <p><strong>Unstable equilibrium</strong>: an equilibrium that a small disturbance makes the system leave. In the inverted pendulum it is a maximum of the potential energy (Eₚ).</p>
    </li>
  </ul>

</details>

<hr />

<h2 id="introducing-mechanical-power">Introducing mechanical power</h2>

<p>In the previous post we modelled our handstand as an inverted pendulum that want to pass as a hanging pendulum. The motion we want to reproduce is the simple harmonic motion, with our centre of mass oscillating periodically about its equilibrium position (Figure 1).</p>

<p>Keep in mind that this behaviour is only possible because of <strong>active control at the wrists</strong>. Unlike a hanging pendulum, an inverted pendulum is not governed by simple harmonic motion and cannot remain stable without continuous corrective action.</p>

<figure>
  <img src="/assets/img/fig1_undamped.gif" alt="Inverted pendulum with PD control and no damping oscillating about the vertical, with E_k constant" />
  <figcaption>Figure 1. Inverted pendulum with torque control.</figcaption>
</figure>

<p>Conceptually, I have always liked to think of these adjustments <strong>in terms of energy</strong>, because the importance of giving the right angular impulse (torque times duration) is something you learn from experience.</p>

<p>In fact, \(\frac{dE}{dt} = \tau\omega\), meaning the “power of the force” is <strong>the rate at which that force transfers energy to the system</strong>. The energy changes only through the work done by the wrists, so it is intuitive to aim at keeping it constant, but at the right value. In the following, we verify how maths supports our intuition.</p>

<p><em>Editorial note: the following part contains a lot of maths, which may make the notation a bit heavy. If you want to skip the whole mathematical treatment and go directly to what interests you most, please jump straight to the section: “Conservation of mechanical energy in SIP”. The whole picture will not change.</em></p>

<p>Recalling the rotational equation of motion:</p>

\[I\ddot{\theta} = mgh\sin\theta + \tau\]

<p>For small deviations (\(\theta \ll 1\)), we use \(\sin\theta \approx \theta\), which gives:</p>

\[I\ddot{\theta} \approx mgh\,\theta + \tau\]

<p>If the body tilts to the right (\(\theta &gt; 0\)), a negative torque is required to counteract the fall.</p>

<p>To quantify how torque transfers energy into rotational motion, we introduce <strong>mechanical power</strong> (\(P\)), expressed in <strong>watt</strong> (torque × angular velocity).</p>

<p>For a torque acting around a single axis:</p>

\[P = \tau\,\omega\]

<p>with \(\omega = \dot{\theta}\) being the angular velocity.</p>

<p>Multiplying the full (nonlinear) equation of motion by \(\omega\) turns every term into a power:</p>

\[I\ddot{\theta}\,\omega = mgh\sin\theta\,\omega + \tau\omega\]

<p>Analysing the terms:</p>

<ul>
  <li>The left-hand side represents the contribution due to rate of change of rotational kinetic energy \(E_k = \frac{1}{2}I\omega^2\) (assuming \(I\) is constant):</li>
</ul>

\[\frac{dE_k}{dt} = I\omega\dot{\omega} = I\ddot{\theta}\,\omega\]

<ul>
  <li>The gravitational term is the power of gravity. Gravity is a conservative force, so its torque can be written as minus the derivative of a potential energy \(E_p\) with respect to the angle:</li>
</ul>

\[mgh\sin\theta = -\frac{dE_p}{d\theta}\]

<p>Integrating gives:</p>

\[E_p = mgh\cos\theta + \text{const}\]

<p>Since only changes in potential energy matter, we are free to choose where it is zero.</p>

<p><em>We take the handstand position as the reference level</em> (\(\theta = 0\)), so that:</p>

\[E_p = mgh\,(\cos\theta - 1)\]

<p>Since \(\cos\theta \le 1\), we have \(E_p \le 0\): any tilt lowers the centre of mass, and with it the potential energy.</p>

<p>In other words, \(\theta = 0\) is a maximum of \(E_p\), like a ball on top of a hill. <em>Any small displacement releases potential energy, which turns into kinetic energy</em>: the upright position is an unstable equilibrium.</p>

<p>For small angles, \(\cos\theta \approx 1 - \theta^2/2\), so</p>

\[E_p \approx -\tfrac{1}{2}mgh\,\theta^2\]

<p>which is an upside-down parabola (Figure 2).</p>

<p>A torque is the negative slope of the energy. 
Differentiating \(E_p\) with respect to \(\theta\), the gravitational torque is</p>

\[-\frac{dE_p}{d\theta} = mgh\sin\theta \approx mgh\,\theta\]

<p>which is exactly the term \(mgh\,\theta\) in the linearised equation of motion, \(I_O\ddot{\theta} \approx mgh\,\theta + \tau\). Its sign is positive: <em>it pushes the body in the direction in which it is already tilted, and therefore away from the vertical</em>. 
The upside-down parabola is the same information, read as energy instead of torque: the steeper the hill, the stronger the push away from the top.</p>

<p>The same function also tells us how the energy changes in time. Because \(E_p\) depends on time only through \(\theta\), the chain rule, with \(\omega = \dot{\theta}\), gives</p>

\[\frac{dE_p}{dt} = \frac{dE_p}{d\theta}\,\omega = -mgh\sin\theta\,\omega\]

<p>so the gravitational term in the power balance is exactly \(-\frac{dE_p}{dt}\).</p>

<p>Rearranging the power balance:</p>

\[\frac{dE_k}{dt} = -\frac{dE_p}{dt} + \tau\omega \implies \frac{d}{dt}(E_k + E_p) = \tau\omega\]

<p>Defining the <strong>total mechanical energy</strong> as \(E = E_k + E_p\)</p>

<p>we obtain the energy rate equation:</p>

\[\frac{dE}{dt} = \tau\omega\]

<h2 id="conservation-of-mechanical-energy-in-the-single-inverted-pendulum">Conservation of mechanical energy in the single inverted pendulum</h2>

<p>One way to understand how the wrists must work against gravity is to think in terms of power and energy. In our single-segment model, the body has a kinetic energy (it is moving) and a gravitational potential energy (how high its centre of mass is), which give the total mechanical energy of the system:</p>

\[E = E_k + E_p = \tfrac{1}{2}I_O\omega^2 + mgh\,(\cos\theta - 1)\]

<p>To evaluate how it changes over time, we take its derivative with respect to time. Using the equation of motion gives the <strong>energy rate equation</strong>:</p>

\[\frac{dE}{dt} = I_O\omega\dot{\omega} - mgh\sin\theta\,\omega = \omega\,(I_O\ddot{\theta} - mgh\sin\theta) = \tau\omega\]

<p>The gravitational term cancels out: gravity only exchanges energy between its kinetic and potential forms, and the total energy changes only through the power \(\tau\omega\) delivered by the control torque. This is why the wrists have to supply power to work against gravity.</p>

<p><strong>The upright position is where the centre of mass is highest</strong>, and <strong>we take it as the zero of potential energy (which in our model is the maximum)</strong>: any tilt lowers the centre of mass, so gravity releases energy and the body speeds up as it falls. Intuitively, we’re balanced at the top of a hill: any small lean converts potential energy into kinetic energy and sends us rolling downhill.</p>

<p>As we have seen, for this to happen it is enough for the wrists to stop providing active control. In the absence of external input, left to itself, the total energy stays constant, and the body falls away from the vertical (Figure 2).</p>

<figure>
  <img src="/assets/img/fig_hilltop.gif" alt="Conservation of energy for the inverted pendulum with no control torque" />
  <figcaption>Figure 2. Conservation of energy for the inverted pendulum with no control torque (\(\tau = 0\)). The upright position is a maximum of \(E_p\), so the body falls away from it: kinetic and potential energy are exchanged while their sum \(E\) stays constant.</figcaption>
</figure>

<h2 id="balance-is-negotiated">Balance is negotiated</h2>

<p>By examining this correction qualitatively, we observe that:</p>

<ul>
  <li>With \(E &lt; 0\), the body does not have enough energy to reach the vertical. As it approaches the upright position its potential energy rises towards zero while its kinetic energy drops, until it vanishes at a tilt \( \theta_s \) given by \( \cos\theta_s = 1 + E/(mgh) \). There the body stops for an instant, and then gravity pulls it back: it falls away from the vertical on the same side it came from.</li>
  <li>With \(E &gt; 0\), the body reaches the vertical with kinetic energy to spare, \( \tfrac{1}{2}I_O\omega^2 = E \). It crosses the upright position without stopping and keeps going: it overshoots, and then falls to the other side.</li>
  <li>With \(E = 0\), we have the borderline case between the two behaviors: the body would balance on the top of the hill, but any tiny disturbance makes it fall to one side or the other.</li>
</ul>

<p>This is why flailing in response to a loss of balance backfires: a large correction can push \(E\) well above zero, and the body overshoots. A correction that is too small leaves \(E &lt; 0\), and the body falls back.</p>

<p>In an ideal world, once \(E = 0\) with the body moving towards the vertical, the wrists would have nothing left to do: \(\frac{dE}{dt} = \tau\omega = 0\), and the energy would stay constant at zero.</p>

<p>In reality, <em>noise, delays and small perturbations keep pushing \(E\) away from zero</em>, so the muscles never stop working. The energy stays close to zero, with the wrists adding or removing small amounts of it, depending on whether the torque acts along (\(\tau\omega &gt; 0\)) or against (\(\tau\omega &lt; 0\)) the motion.</p>

<p>Balancing is therefore not simply “pushing against the fall”: the wrists have to add or remove the right amount of energy at the right moments, until both the tilt and the velocity go to zero. This is why small, well-timed adjustments work better than large, abrupt ones.</p>

<p>In the next post we will see in detail the control rule that describe this fine wrist control.</p>

<p>This post is part of <em><a href="/series/">the handstand balance model</a>.
<a href="https://dopamine-chamber.github.io/2026-10-25-handstand-balance-damped-oscillator.html">Next post: cooming soon →</a></em></p>

<h4 id="sources-and-references">Sources and references</h4>
<ul>
  <li>Loughborough University Repository - <a href="https://repository.lboro.ac.uk/articles/journal_contribution/Control_strategy_for_a_hand_balance/9630269?file=17279426" target="_blank" rel="noopener noreferrer"><em>Control strategy for a hand balance</em></a></li>
  <li>
    <p>Royal Society Open Science - <a href="https://royalsocietypublishing.org/rsos/article/4/7/161018/93310/Balance-control-strategies-during-perturbed-and" target="_blank" rel="noopener noreferrer"><em>Balance control strategies during perturbed and unperturbed balance in standing and handstand</em></a></p>
  </li>
  <li>Figures 1 and 2 - <em>Generated via Python for</em> <a href="https://dopamine-chamber.github.io/" target="_blank" rel="noopener noreferrer"><em>dopamine-chamber.github.io</em></a></li>
</ul>]]></content><author><name>Benedetta Giglio</name></author><category term="handstand" /><category term="handstand physics" /><category term="inverted pendulum" /><category term="balance" /><summary type="html"><![CDATA[Why is a handstand unstable? In an energy perspective, the body sits on top of a potential-energy hill: almost motionless, yet in unstable equilibrium.]]></summary><media:thumbnail xmlns:media="http://search.yahoo.com/mrss/" url="https://dopamine-chamber.github.io/assets/img/fig1_undamped.gif" /><media:content medium="image" url="https://dopamine-chamber.github.io/assets/img/fig1_undamped.gif" xmlns:media="http://search.yahoo.com/mrss/" /></entry><entry><title type="html">The straight two-arm model and why to fit it</title><link href="https://dopamine-chamber.github.io/2026/10/20/straight-two-arm-handstand-model.html" rel="alternate" type="text/html" title="The straight two-arm model and why to fit it" /><published>2026-10-20T00:00:00+00:00</published><updated>2026-11-01T00:00:00+00:00</updated><id>https://dopamine-chamber.github.io/2026/10/20/straight-two-arm-handstand-model</id><content type="html" xml:base="https://dopamine-chamber.github.io/2026/10/20/straight-two-arm-handstand-model.html"><![CDATA[<p>In this post we will use a simplified model to start understanding why handstands are intrinsically unstable. <em>Only the model is simple, because, to me, the straight handstand is anything but simple.</em></p>

<hr />

<details>
  <summary><strong>Toolbox</strong></summary>

  <ul>
    <li>
      <p><strong>Rigid body</strong>: an idealisation in which the distance between any two points of the body stays constant: the body does not deform and can only translate and rotate. In biomechanics, the human body is often represented as a rigid-body model.</p>
    </li>
    <li>
      <p><strong>Angular velocity</strong> (ω): how fast the tilt angle changes over time [rad/s]. It is the time derivative of θ.</p>
    </li>
    <li>
      <p><strong>Angular acceleration</strong> (α): how fast the angular velocity changes over time [rad/s²].</p>
    </li>
    <li>
      <p><strong>Centre of mass</strong> (CoM): the point where the whole mass of a body can be considered concentrated, and which moves like a single particle subject to the total external force.</p>
    </li>
    <li>
      <p><strong>Lever arm</strong>: the perpendicular distance between the line of action of a force and the axis of rotation [m].</p>
    </li>
    <li>
      <p><strong>Pivot</strong>: the fixed point about which the body rotates. In the model it is the wrists.</p>
    </li>
    <li>
      <p><strong>Amplitude</strong> (θ₀): the maximum angle reached during the oscillation.</p>
    </li>
    <li>
      <p><strong>Angular frequency</strong> (ω₀): how fast the oscillation cycles [rad/s]. It is related to the period by T = 2π/ω₀.</p>
    </li>
    <li>
      <p><strong>Period</strong> (T): the time taken for one complete oscillation [s].</p>
    </li>
    <li>
      <p><strong>Moment of inertia</strong> (I₀): a measure of a body’s resistance to changes in its rotation, here about the pivot (the wrists) [kg·m²].</p>
    </li>
    <li>
      <p><strong>Control torque</strong> (τ): torque generated by the muscles, equal to the force times its lever arm [N·m].</p>
    </li>
    <li>
      <p><strong>Tilt angle</strong> (θ): angle between the body axis and the vertical [rad].</p>
    </li>
  </ul>

</details>

<hr />

<h2 id="single-inverted-pendulum-a-more-accurate-model-for-humans">Single inverted pendulum: a more accurate model for humans</h2>

<p>The body tilting in a handstand is <em>more similar</em> to what in physics is known as <strong>single inverted pendulum</strong> (SIP), a pendulum where <strong>the centre of mass is above the pivot point</strong>. Due to its configuration, the system implements <strong>control logic</strong> to not falling, being a common model used in biomechanics applications that involve <strong>balance</strong>, like gait analysis, upright position and athletic skills, including handstands. (Figure 1).</p>

<figure>
  <img src="/assets/img/inverted_pendulum_handstand_model_r1.png" alt="Inverted pendulum model" />
  <figcaption>Figure 1. Single segment inverted pendulum model for a straight two-arm handstand.</figcaption>
</figure>

<p>In this configuration, equations of motion become:</p>

\[\sum M_{O} = I_{O}\,\alpha = mgh\sin\theta+\tau = 0\]

\[mgh\sin\theta = - \tau\]

<p>where θ is the angle between the body axis and the vertical, suggesting that <strong>the magnitude of the torque generated by the wrist muscles depends on the tilt angle</strong> (Figure 2).</p>

<p>This is reasonably consistent with what we observe in practice: <em>small oscillations usually call for small adjustments</em> that are not too demanding in terms of muscular effort. When the tilt becomes too large, the wrists can no longer counteract the moment generated by gravity, and we fall.</p>

<figure>
  <img src="/assets/img/handstand_dynamic_equilibrium.gif" alt="Single inverted pendulum model" />
  <figcaption>Figure 2. Motion of the inverted pendulum.</figcaption>
</figure>

<h2 id="youre-not-a-simple-harmonic-oscillator">You’re not a simple harmonic oscillator</h2>

<p>To introduce this topic, it is helpful to briefly revisit the simple pendulum and its equation of motion.</p>

<p>In a simple hanging pendulum (the one whose body is suspended from a fixed point that swings freely under gravity) the centre of mass describes <strong>harmonic motion</strong>, at least for small oscillations. In the ideal case, the angular position over time is modelled by a cosine function, \(\theta(t) = \theta_0 \cos(\omega_0 t)\), where \(\theta_0\) is the initial amplitude and \(\omega_0\) is the angular frequency.</p>

<p>I understand this may sound tedious and long-winded, but there is a reason why understanding the difference between the hanging pendulum model and the inverted pendulum model matters.</p>

<p><em>And in case you didn’t know, I love waves.</em></p>

<p>Under this regime, its velocity continuously changes direction at the oscillation limits and varies in magnitude, reaching its maximum as the system crosses the vertical reference line.</p>

<p>This is what happens, more or less, to your centre of mass when you use you fingers to recover balance. In fact, the common wisdom about controlling a handstand revolves around this idea: if you are falling forward, push with your fingers; if you are falling backward, push with your palms. What you are being asked to do is behave like a <strong>harmonic oscillator</strong>.</p>

<p>Unfortunately for those who who genuinely approach handbalancing, as we have seen from the equation above, this result cannot be achieved without active control at the wrists (\(\tau\)).</p>

<p>Yet, an ideal inverted pendulum cannot be mathematically described by simple harmonic motion: it diverges exponentially from the vertical (for small angles). In other words, what we would like to obtain is simply not supported by the underlying physics of the system.</p>

<p>This is due to the <strong>unfavorable configuration we occupy within the gravitational field</strong>: our pivot point is located at ground level, while the entire weight of our body is distributed above and rotates around it.</p>

<p>When balancing on hands, you (the inverted pendulum) are being asked to behave like a simple pendulum, turning an unstable system into one that oscillates about the vertical (our handstand).</p>

<p>Furthermore, <em>even a real hanging pendulum does not behave like an ideal hanging pendulum</em>, and you are not a hanging pendulum. Gravity is against you, and the system you most resemble is unstable by nature: left to itself, it tends to fall.</p>

<p>In short, in a hanging pendulum, harmonic motion (which is what we want our centre of mass to do around the vertical) is the natural behaviour of the system and needs no control, because gravity provides the restoring torque that brings it back to equilibrium. In an inverted pendulum, <em>gravity pushes us away from equilibrium</em>, so we have to <em>counteract it and recreate the harmonic oscillations ourselves</em>.</p>

<p>Luckily, in reality, <em>you are not a hanging pendulum, nor a inverted one</em>, and you can train your muscles to describe what type of motion you want (differently from pendulums, they learn). So, once again: understand how the motion works, what its characteristics are, and how to reproduce it with our body.</p>

<p>With active wrist control, we can create behaviour that resembles simple harmonic motion.</p>

<p>In other words, <em>nature will not produce restoring torques for you, but at least has provided you with the neuromotor control system which can learn how to generate them</em> (Figure 3).</p>

<figure>
  <img src="/assets/img/handstand_shm.gif" alt="Simple harmonic oscillator" />

   <img src="/assets/img/shm_top_view.gif" alt="Simple harmonic oscillator" />
  <figcaption>Figure 3. Kinematic and dynamic model of a straight-arm handstand represented as an inverted pendulum. Left: Diagram of the model where the wrists act as a pivot point, while the center of mass (CM) oscillates relative to the vertical equilibrium line in lateral view (top) and top view (bottom). Top right: Graph of simple harmonic motion showing the tilt angle as a function of time (which is a cosine function), with a period T = 2.0 s. Bottom right: Plot of angular velocity, which is the time derivative of the position function and it's magnitude reaches its maximum when the body crosses the vertical.</figcaption>
</figure>

<p>In short, the ability to recover balance depends on the torque we can generate at the wrists.</p>

<h2 id="if-in-doubt-be-a-pendulum">If in doubt, be a pendulum</h2>

<p>Either way, whether you are a hanging pendulum or an inverted one, being a pendulum is what truly matters: as we will see, this is the simplest configuration to study and define, and therefore the simplest case in which to predict and contain perturbations. Unfortunately, holding the posture that makes the body behave like a pendulum is very hard, and it involves non-trivial muscle activations. This is the reason why more experienced athletes, who have greater neuromuscular control, perform better in this specific task and are better able to maintain the position. As I said at the beginning of the post, the straight handstand was the hardest position for me to learn. Not to understand, but to actually learn. Things improved when I learned the correct <strong>posterior pelvic tilt</strong>. In the next posts we will look at what these activations are and how they affect the model.</p>

<p>Moreover, because of the dependence of \(\tau\) on \(h\), this result also suggests that the magnitude of the torque required to recover balance depends on the height of the center of mass, meaning that taller people may struggle more in handstands (Figure 4).</p>

<figure>
  <img src="/assets/img/height_com_visual.gif" alt="Height of the centre of mass" />
  <figcaption>Figure 4. The magnitude of the torque required to recover balance depends on the height of the center of mass.</figcaption>
</figure>

<p>In the next posts, we will see that other parameters also play a role and that the wrists can exert only a limited torque, bounded by the size of the contact area under the hands: if \(mgh\sin\theta\) exceeds that limit, the fall can no longer be stopped.</p>

<p>This post is part of <em><a href="/series/">the handstand balance model</a>.
<a href="https://dopamine-chamber.github.io/2026/10/20/an-energy-perspective.html">Next: an energy perspective on handstands balance →</a></em></p>

<h4 id="sources-and-references">Sources and references</h4>
<ul>
  <li>Frontiers - <a href="https://www.frontiersin.org/journals/sports-and-active-living/articles/10.3389/fspor.2025.1694648/full" target="_blank" rel="noopener noreferrer"><em>Biomechanical analyses of the handstand: a systematic review</em></a></li>
  <li>Chris Gatti - <a href="https://www.chrisgatti.com/blog/2019/10/6/a-simple-model-of-the-handstand" target="_blank" rel="noopener noreferrer"><em>A simple model of the handstand</em></a></li>
  <li>Figures 1 and 2 - <em>AI-generated illustration created with Claude (Anthropic) for</em> <a href="https://dopamine-chamber.github.io/" target="_blank" rel="noopener noreferrer"><em>dopamine-chamber.github.io</em></a></li>
  <li>Figures 3, 4 and 5 - <em>Generated via Python for</em> <a href="https://dopamine-chamber.github.io/" target="_blank" rel="noopener noreferrer"><em>dopamine-chamber.github.io</em></a></li>
</ul>]]></content><author><name>Benedetta Giglio</name></author><category term="handstand" /><category term="biomechanics" /><category term="inverted pendulum" /><category term="movement" /><category term="human movement" /><category term="model" /><category term="handstand balance model" /><summary type="html"><![CDATA[The physics behind handstands: use a simplified handstand balance model to start understanding why handstands are intrinsically unstable.]]></summary><media:thumbnail xmlns:media="http://search.yahoo.com/mrss/" url="https://dopamine-chamber.github.io/assets/img/handstand_shm.gif" /><media:content medium="image" url="https://dopamine-chamber.github.io/assets/img/handstand_shm.gif" xmlns:media="http://search.yahoo.com/mrss/" /></entry><entry><title type="html">Handstand balance: modelling the problem</title><link href="https://dopamine-chamber.github.io/2026/10/19/handstand-physics-balance-model.html" rel="alternate" type="text/html" title="Handstand balance: modelling the problem" /><published>2026-10-19T00:00:00+00:00</published><updated>2026-11-01T00:00:00+00:00</updated><id>https://dopamine-chamber.github.io/2026/10/19/handstand-physics-balance-model</id><content type="html" xml:base="https://dopamine-chamber.github.io/2026/10/19/handstand-physics-balance-model.html"><![CDATA[<p>There is a simple physical truth behind the ability to hold a handstand: the constant, <em>inevitable</em> pull of gravity. In fact, beneath the apparent absence of motion, a vibrant orchestra of variables contribute to the balance. To attempt to barely understand them and how they play their role in the symphony, we need a model that captures the real situation. This will be the research that, starting from there, will take place here.</p>

<p><em>A friendly disclaimer: I am not a professional hand balancer, and the aim of this project is neither to provide a method for practicing handstands nor to teach how to perform them. Its purpose is to observe the phenomenon and describe the underlying principles that make it possible. What follows is a summary of the conceptual rabbit hole I have been exploring so far.</em></p>

<h2 id="is-the-handstand-a-dilemma">Is the handstand a dilemma?</h2>

<p>For a long time, my engineering background led me to think of handbalancing as a problem of mechanical equilibrium. And for years, practicing handstands felt remarkably similar to solving a physics problem.</p>

<p><em>Which muscles should I recruit for a given task? (Which variables compose this system?)</em><br />
<em>Which is the most important? (Which is the key variable?)</em><br />
<em>How can I engage the strongest and most natural kinetic chain without introducing compensations? (Which method is the most effective?)</em></p>

<p>And yet, what people generally say about handstands sound similar to what my Physics I professor said on the first day of the course:
<em>“Sorry if this first lecture may sound complicated. Physics has no beginner level.”</em></p>

<p>Talking of handstands, it’s undeniable that <strong>the human body is not designed to balance itself on hands</strong>, nor for holding handstands for that long. Being upside down is not exactly what we evolved for. Anyway, I’m still fascinated by its <strong>ability to reorganize and adapt</strong>, even when faced with such an <em>unusual, functionally useless, mentally draining and frustrating task</em>.</p>

<p>But it’s important to go across this journey with the right amount of self-denial.
And a bit of rage.</p>

<h2 id="understanding-models-understanding-handstands">Understanding models (understanding handstands?)</h2>

<p>To understand how these beautiful things (these that happen on hands) happen, we need a <strong>model</strong> that can be grasped on the cognitive level. Therefore, over the years, my all-consuming side project has been refining this model to make it fit the handstand dilemma, and ultimately to find the perfect solution to the system. <br />
<em>And practicing handstands, of course</em>.</p>

<p><em>Editorial note: in this blog there will be a fair amount of maths. Although they’re very elegant, my mind doesn’t love formulas. But they help a lot to support and clarify what often exists only in our mind as a confused cloud. Maths can also be remarkably relaxing at times. I tend to be an anxious person, and when irrational fears creep into my mind, I like to keep them in check by using numbers to anchor myself in reality. Almost always, I find that the anxiety was only in my head, not in the facts. If something doesn’t make sense, check the toolbox and look up the relevant definition.</em></p>

<hr />

<details>
  <summary><strong>Toolbox</strong></summary>

  <ul>
    <li>
      <p><strong>Rigid body</strong>: an idealisation in which the distance between any two points of the body stays constant: the body does not deform and can only translate and rotate. In biomechanics, the human body is often represented as a rigid-body model.</p>
    </li>
    <li>
      <p><strong>Angular velocity</strong> (ω): how fast the tilt angle changes over time [rad/s]. It is the time derivative of θ.</p>
    </li>
    <li>
      <p><strong>Angular acceleration</strong> (α): how fast the angular velocity changes over time [rad/s²].</p>
    </li>
    <li>
      <p><strong>Centre of mass</strong> (CoM): the point where the whole mass of a body can be considered concentrated, and which moves like a single particle subject to the total external force.</p>
    </li>
    <li>
      <p><strong>Lever arm</strong>: the perpendicular distance between the line of action of a force and the axis of rotation [m].</p>
    </li>
    <li>
      <p><strong>Pivot</strong>: the fixed point about which the body rotates. In the model it is the wrists.</p>
    </li>
    <li>
      <p><strong>Amplitude</strong> (θ₀): the maximum angle reached during the oscillation.</p>
    </li>
    <li>
      <p><strong>Angular frequency</strong> (ω₀): how fast the oscillation cycles [rad/s]. It is related to the period by T = 2π/ω₀.</p>
    </li>
    <li>
      <p><strong>Period</strong> (T): the time taken for one complete oscillation [s].</p>
    </li>
    <li>
      <p><strong>Moment of inertia</strong> (I₀): a measure of a body’s resistance to changes in its rotation, here about the pivot (the wrists) [kg·m²].</p>
    </li>
    <li>
      <p><strong>Control torque</strong> (τ): torque generated by the muscles, equal to the force times its lever arm [N·m].</p>
    </li>
    <li>
      <p><strong>Tilt angle</strong> (θ): angle between the body axis and the vertical [rad].</p>
    </li>
  </ul>

</details>

<hr />

<p>Let’s then use maths to prove that handstands can be held, and also why they are so difficult. And for the scope, we will give a <em>little</em> definition of what a model is.</p>

<p>A model is a simplified formalization of a real phenomenon or problem, expressed in a language that can be analyzed and that retains only the relevant variables. The first step is therefore choosing the <strong>level of abstraction</strong>: we need to determine which variables are relevant. Then we have to represent them in a language that allows precise treatment (e.g. equations). On the other hand, models are valid <em>only within the domain they were built for</em>, and if reality departs from their assumptions, the model must be revised.</p>

<p>Therefore, if someone asked you: <em>“What is the best model for mathematically describing how to do a handstand?”</em>, the first answer would be: <em>“Which type of handstand?”</em><br />
And even before that: <em>what actually is a handstand?</em></p>

<p>While we were able to give a clear, agreed-upon definition for the model, the same cannot be done for the handstand. Not only because there are many different handstand variations (even if this must be considered in the model, of course), but because it is hard to define the problem itself without relying on personal experience.
<em>Handbalancing is deeply experiential, not spelled out. And complexity is part of the game.</em></p>

<p>Therefore, modelling something that is hard to describe in explicit terms is no walk in the park. 
Regarding the level of abstraction, actually, I have trouble leaving out irrelevant aspects. I have a mind that tends to dwell on everything, analyzing it for so long that the rest of the world starts to flow past behind it while I end up <em>down the rabbit hole</em>, carrying along everything I found on the way. In short, for me, it calls for an in-depth study.</p>

<p>Anyway, from now on, trying to model the problem will happen on the three <strong>anatomical planes</strong> onto which <strong>human movement</strong> can be projected: the frontal (or coronal) plane, the transverse (or horizontal) plane, and the sagittal (or median) plane (Figure 1).</p>

<figure>
  <img src="/assets/img/planes_of_human_movement.png" alt="Frontal, sagittal, and transverse planes through a standing human figure" />
  <figcaption>Figure 1. Anatomical body planes.</figcaption>
</figure>

<p><em>Armed with these colorful hopes</em>, we will analyse all the problems of the handstand and try to isolate them, study them one by one, and then combine them into a cocktail party that should be our handstand. We will use formulas, see with our own eyes the dependence on the parameters, and make some assumptions. And, as we know, answers will be valid only within the assumptions we chose.</p>

<h2 id="a-pinch-of-assumptions-and-a-first-model-the-body-is-a-stick">A pinch of assumptions and a first model: the body is a stick</h2>

<p>Let’s start with a first extremely simplified model. First, we have to make our <strong>boring but necessary assumptions</strong>: don’t worry, these are the most relevant and we will treat them as given in the next posts.</p>

<ul>
  <li>First, we suppose that the handstand system is perfectly symmetrical, with two arms pushing with the same force and in the same direction.<br /></li>
  <li>We assume zero inclination in the frontal plane, and consider only the inclination that occurs in the sagittal plane when we push with both fingers and palms to adjust the balance.<br /></li>
  <li>We also assume that arms, shoulders, hips and legs work identically and do not generate twists.</li>
  <li>We initially treat the human body as a <strong>single rigid body</strong>, so that we can describe its motion through the position of its <strong>centre of mass</strong>.<br /></li>
  <li>We see its motion from the sagittal plane, which divides the head (or brain) from the rest of the body into right and left sections (Figure 2):</li>
</ul>

<figure>
  <img src="/assets/img/single_segment_handstand_pendulum_model.png" alt="Handstand modelled as a single rigid segment pivoting about the wrists, with the centre of mass marked" />
  <figcaption>Figure 2. The body modelled as a single element described by its center of mass.</figcaption>
</figure>

<p>In this easy but not simple body configuration, the governing equation is Newton’s second law:</p>

\[\sum \mathbf{F} = m\mathbf{a}_{CM}\]

<p>When the centre of mass translates in the sagittal plane due to physiological handstand revocery swings, gravity will produce a moment about the wrists we can write this way:</p>

\[\sum M_{O} = I_{O}\,\alpha = mgh+\tau\]

<p>where \(\tau\) is the active control of the wrists. 
When we hold a handstand, the net moment must be zero, meaning there are no accelerations and the moment generated by gravity is perfectly counteracted by the torque generated by the wrists:</p>

\[mgh+\tau = 0 \Rightarrow mgh = - \tau\]

<p>In a real handstand, however, the body is never perfectly stationary and perpendicular to the floor. Small adjustments are performed at the hand level, which means the acceleration is not zero. In the next post, we will introduce dynamics and analyze the torques that keep the body (barely) upright.</p>

<p>This post is part of <em><a href="/series/">the handstand balance model</a>.
<a href="https://dopamine-chamber.github.io/2026/10/20/straight-two-arm-handstand-model.html">Next: a more accurate handstand balance model →</a></em></p>

<h4 id="sources-and-references">Sources and references</h4>

<ul>
  <li>Royal Society Open Science - <a href="https://doi.org/10.1098/rsos.161018" target="_blank" rel="noopener noreferrer"><em>Balance control strategies during perturbed and unperturbed balance in standing and handstand</em></a> (<a href="https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5541526/" target="_blank" rel="noopener noreferrer">open access</a>)</li>
  <li>Medicine &amp; Science in Sports &amp; Exercise - <a href="https://pubmed.ncbi.nlm.nih.gov/11445766/" target="_blank" rel="noopener noreferrer"><em>Strategies for maintaining a handstand in the anterior-posterior direction</em></a></li>
  <li>Loughborough repository - <a href="https://repository.lboro.ac.uk/articles/journal_contribution/Control_strategy_for_a_hand_balance/9630269" target="_blank" rel="noopener noreferrer"><em>Control strategy for a hand balance</em></a></li>
  <li>Gait &amp; Posture - <a href="https://doi.org/10.1016/0966-6362(96)82849-9" target="_blank" rel="noopener noreferrer"><em>Human balance and posture control during standing and walking</em></a></li>
  <li>Figures 1, 2: <em>AI-generated illustration created with Claude (Anthropic) for</em> <a href="https://dopamine-chamber.github.io/" target="_blank" rel="noopener noreferrer"><em>dopamine-chamber.github.io</em></a></li>
</ul>]]></content><author><name>Benedetta Giglio</name></author><category term="handstand" /><category term="biomechanics" /><category term="inverted pendulum" /><category term="movement" /><category term="handbalancing" /><category term="balance" /><category term="human movement" /><category term="model" /><summary type="html"><![CDATA[Handstands are far from stationary. A first physical model of handstand balance, and why holding one is so hard.]]></summary><media:thumbnail xmlns:media="http://search.yahoo.com/mrss/" url="https://dopamine-chamber.github.io/assets/img/handstand-physics-balance-model.png" /><media:content medium="image" url="https://dopamine-chamber.github.io/assets/img/handstand-physics-balance-model.png" xmlns:media="http://search.yahoo.com/mrss/" /></entry></feed>